Need help?Do you have a question about the OTT Pluvio 2 S and is the answer not in the manual?
General| Measurement Principle | Weighing principle |
|---|---|
| Resolution | 0.01 mm |
| Heated Version | Yes |
| Data Interface | RS-485, SDI-12 |
| Housing Material | Aluminum, powder-coated |
| Protection Class | IP67 |
| Operating Temperature | -40°C to +70°C |
| Supply Voltage | 12 VDC or 24 VDC |
| Output | Rain intensity, amount, and duration |
| Power Supply | 12 VDC or 24 VDC |
Details how the device outputs data via serial interfaces, covering intensity and accumulated precipitation.
Explains data transmission using pulse signals for precipitation amount and status information.
Describes the optional feature for keeping the orifice rim clear of snow and ice.
Specifies required cable types and their maximum permissible lengths for connections.
Guides on selecting an appropriate site and preparing the concrete foundation.
Details the process of securing the base plate onto the installed pedestal.
Crucial step to ensure the base plate is level for accurate weighing measurements.
Covers fundamental communication protocols and commands for the device.
Details configuration options and advanced control commands for the sensor.
Instructions on how to safely empty the collecting bucket during regular maintenance.
Guidance on using anti-freeze to prevent damage from frozen precipitation.
Provides solutions for common issues with communication and output signals.
Details the procedure for checking and verifying the gauge's measurement accuracy.
Guides the integration of the Pluvio2 S with dataloggers using serial interfaces.
Explains the alternative method of connecting the gauge using pulse outputs.
To Next Page
