4 Basic safety information
䊳
Please read these Operating Instructions before using the OTT Pluvio
2
S for the
first time! Make yourself completely familiar with the installation and operation
of the OTT Pluvio
2
S! Keep these Operating Instructions for later reference.
䊳
The OTT Pluvio
2
S is used for automatic determination of the meteorological
precipitation intensity and amount of precipitation. Use the OTT Pluvio
2
S only
as described in these Operating Instructions!
For further information ➝ see Chapter 3, „Introduction“.
䊳
Note all the detailed safety information given within the individual steps. All
safety information in these Operating Instructions is identified by the warning
symbol shown here.
䊳
Avoid heavy shaking and shocks during transport and operation!
T
he OTT Pluvio
2
S
is equipped with a highly sensitive electronic weighing
mechanism. Only use the original packaging for transport!
䊳
Ensure the electrical, mechanical, and climatic specifications listed in the
technical data are adhered to.
For further information ➝ see Chapter 10, „Technical Data”.
䊳
Carry out all recommended maintenance work at the frequencies specified.
See Chapter 7, „Carrying out maintenance work“.
䊳
Do not make any changes or retrofits to the OTT Pluvio
2
S! If changes or
modifications are made, any warranty will be void.
䊳
Have a defective OTT Pluvio
2
S checked and repaired only by the OTT repair
center. On no account carry out repairs yourself! Only a qualified repair
followed by a factory final test ensures the specified measurement accuracy.
For further information ➝ refer to Chapter 8, „Repair“.
䊳
Properly dispose of the OTT Pluvio
2
S after taking out of service. On no account
put the OTT Pluvio
2
S into the normal household waste.
For further information ➝ see Chapter 9, „Notes on the disposal of used units“.
15
To Next Page
Loading...
