OTT Pluvio - Pluvio Type 1000 Wiring; Connection Terminals Overview; Terminal Function Mapping; Resolution and Range Attention

from contact of housing
123123
Connection of
weighing cell
CONTACT
black red
Shield
white
CONTACT 20 mA + 20 mA -
green
3
123456
123456
CONTACT
Status (10 Hz)
Resolution 0.01 mm
black
1
2
green / pink
Connection
for +12 V DC
3
Supply current source -
violet
grey
black
pink
grey
CONTACT
red / blue
20 mA + Supply current source + 20 mA -
yellow green red blue
Supply GND Supply +12 VDC n. c. n. c. +12 V n. c.
white brown
red/blue
Status
Pluvio precipitation
yellow
green/pink
violet
grey
pink
blue
red
black
brown
green
white
2
1
1
2
+12 VDC (supply)
GND (supply)
8…24V(supply current source)
GND (supply current source)
Connection
for sensors/outputs
Pluvio type 1000 with status output
}
PWR
Contact (0.1 mm; 10 Hz)
Status (10 Hz)
Status (10 Hz)
Contact (0.1 mm; 10 Hz)
20 mA – (current source; 0.1 mm)
20 mA + (current source; status)
20 mA – (current source; status)
20 mA + (current source; 0.1 mm)
ATTENTION
Resolution: 0.1 mm per pulse, output frequency 10 Hz symmetric
1.0 mm per pulse, output frequency 1 Hz symmetric
Range: 0 to 30 mm precipitation per minute