EasyManua.ls Logo

OttLite Creative Series User Manual

OttLite Creative Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENGLISH
CONGRATULATIONS! You’ve
purchased the finest in natural lighting
technology with your new OttLite
®
product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today
by mail, or register online by going to:
http://warranty.OttLite.com.
WARNING: To prevent electric shock,
make sure the lamp is not plugged in
until all assembly steps are complete.
To avoid lamp tip over, position lamp
shade as shown in diagram.
CAUTION: TIP HAZARD
DO NOT MOVE SHADE outside of the
shaded area as shown in Figure 1.
Shade must be kept within the shaded
area and must align in the same for-
ward-facing direction as the base.
TUBE INSERTION/REPLACEMENT
1. Make sure the lamp is not plugged
into an electrical socket.
2. If the lamp has been in use, allow it
to
cool approximately five minutes before
proceeding.
3. To install a tube (A) in the socket,
grasp the tube firmly in your hand, and
push the tube straight into the socket
by applying pressure to the base of
tube, until it “snaps” into place.
4. To remove a tube (A) already installed
in the lamp, grasp it firmly in your hand
and pull it straight out of the socket. Do
not twist or turn the tube while
removing it from the socket.
5. Plug the lamp into a standard 120V
socket. Your lamp is ready for use.
6. To turn the lamp on or off depress
the
pushbutton switch (B) located in the
front of the base.
Please note that in operation, OttLite
®
tubes are not dimmable.
Enjoy your OttLite
®
Creative Series
Flexible Table Lamp!
This lighting system is designed
for use with OttLite
®
type bulbs
(style number PL13-E). Use of other
products voids the warranty and
may result in damage to the lighting
system.
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO
REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE
PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED.
DO NOT ALTER THE PLUG.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
AVERTISSEMENT! IMPORTANTES DIRECTIVES DE
SÉCURITÉ:
CETTE LAMPE PORTATIVE EST MUNIE D’UNE FICHE POLARISÉE (UNE LAME PLUS LARGE QUE L’AUTRE). CE
DISPOSITIF DE SÉCURITÉ DIMINUE LE RISQUE DE CHOCS ÉLECTRIQUES PUISQUE LA FICHE NE S’INSÈRE DANS
LA PRISE QUE D’UN SEUL CÔTÉ. SI ELLE N’ENTRE PAS DANS LA PRISE, INVERSEZ-LA. SI ELLE N’ENTRE
TOUJOURS PAS, CONTACTEZ UN ÉLECTRICIEN QUALIFIÉ. N’UTILISEZ JAMAIS AVEC UNE RALLONGE SAUF SI
LA FICHE S’INSÈRE ENTIÈREMENT. NE MODIFIEZ PAS CE DISPOSITIF DE SÉCURITÉ.
AVERTISSEMENT: POUR ÉVITER LES CHOCS ÉLECTRIQUE, INSÉREZ LE BOUT LARGE DE LA
FICHE DANS LA GRANDE FENTE ET POUSSEZ JUSQU’AU BOUT.
¡
PRECAUCIÓN! INSTRUCCIONES DE SEGURIDAD
IMPORTANTES:
ESTA LÁMPARA PORTÁTIL TIENE UN ENCHUFE POLARIZADO (UNA DE SUS PATAS ES MÁS ANCHA QUE LA OTRA)
COMO CARACTERISTICA PARA REDUCIR EL RIESGO DE UNA DESCARGA ELÉCTRICA. ESTE ENCHUFE ENCAJARÁ EN
CUALQUIER TOMACORRIENTE POLARIZADO SOLO DE UNA MANERA. SI EL ENCHUFE NO CALZA COMPLETAMENTE
EN EL TOMACORRIENTE DÉLE LA VUELTA. SI AÚN NO ENCAJA, PÓNGASE EN CONTACTO CON UN ELECTRICISTA
CALIFICADO. NUNCA UTILICE UNA EXTENSIÓN A NO SER QUE EL ENCHUFE PUEDA SER TOTALMENTE
INSERTADO. NO ALTERE EL ENCHUFE.
PRECAUCIÓN: PARA PREVENIR UNA DESCARGA ELÉCTRICA, HAGA COINCIDIR LA PATA ANCHA DEL
ENCHUFE CON LA RANURA ANCHA, INSERTE TOTALMENTE.
Flexible Table Lamp
CAUTION! If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or its service agent or a similar qualified person in order to avoid a hazard. Indoor use only.
REV012611
Creative Series Flexible Table Lamp
U15WG8
PL-7963
A
B
Usable area for shade
Area útil para la pantalla
Zone sécuritaire pour
l’abat-jour
DO NOT USE SHADE
IN THIS AREA
NO UTILICE LA
PANTALLA EN ESTA
AREA
NE PAS PLACER
L’ABAT-JOUR DANS
CETTE ZONE.
FIGURE 1 / FIGURA 1
For more information on purchasing replacementv tubes/
bulbs please go to www.OttLite.com/replacement13wtube
Question and Answer IconNeed help?

Do you have a question about the OttLite Creative Series and is the answer not in the manual?

OttLite Creative Series Specifications

General IconGeneral
BrandOttLite
ModelCreative Series
CategoryHome Lighting
LanguageEnglish

Summary

Product Registration

Safety Warnings

Electric Shock Prevention

Ensure the lamp is not plugged in until all assembly steps are complete to prevent electric shock.

Tip Hazard Prevention

Position lamp shade within the shaded area to prevent tip-over.

Tube Installation and Replacement

Preparation for Tube Handling

Ensure lamp is unplugged and allow to cool for five minutes before handling tubes.

Installing a Tube

Grasp tube firmly and push straight into socket until it snaps into place.

Removing a Tube

Grasp tube firmly and pull straight out without twisting or turning.

Lamp Operation

Connecting to Power

Plug the lamp into a standard 120V socket for use.

Power Control

Depress the pushbutton switch located in the front of the base to turn the lamp on or off.

Bulb Compatibility and System Use

Recommended Bulb Type

This system is designed for OttLite® type bulbs (style number PL13-E) only.

Warranty and Damage Disclaimer

Using other products voids warranty and may result in damage to the lighting system.

Dimmability

OttLite® tubes are not dimmable during operation.

Important Safety Instructions

Polarized Plug Safety Feature

Lamp features a polarized plug to reduce electric shock risk; fits outlet one way.

Addressing Plug Fit Issues

Reverse plug or contact electrician if plug does not fit fully in outlet.

Extension Cord Usage Restriction

Never use an extension cord unless the plug can be fully inserted.

Plug Modification Prohibition

Do not alter the plug under any circumstances.

Electrical Shock Prevention Guideline

Match wide blade of plug to wide slot and insert fully to prevent shock.

Related product manuals