What to do if my Otto Bock A200 Wheelchair battery has undervoltage?
If your Otto Bock Wheelchair displays a battery undervoltage error, it may be due to a deep discharge or a faulty connection. Try charging the battery. Also, check the connection to the battery; if the connection is proper, continue charging the battery.
Why is my Otto Bock Wheelchair driving function blocked?
The driving function of your Otto Bock Wheelchair might be blocked because the battery charger is connected. Disconnect the battery charger to resolve this.
What to do if my Otto Bock A200 Wheelchair shows a joystick error?
If you're getting a joystick error on your Otto Bock Wheelchair, it might be because the joystick wasn't in the zero position when you switched it on. Make sure to bring the joystick to the zero position before turning the wheelchair on.
What to do if my Otto Bock Wheelchair battery has overvoltage?
If your Otto Bock Wheelchair indicates a battery overvoltage, it could be due to the voltage being too high or loose battery contacts. Try driving slowly and check the plug contacts.
What to do if there is incorrect cabling of the left motor of Otto Bock A200 Wheelchair?
If there's an issue with the left motor cabling on your Otto Bock Wheelchair, possibly due to a defective motor or a faulty plug connection, check the connections to the left motor and inspect the motor itself.
What to do if there is incorrect cabling of the right motor of Otto Bock Wheelchair?
If you suspect incorrect cabling with the right motor of your Otto Bock Wheelchair, which may be caused by a defective motor or faulty plug connection, check the connections to the right motor and inspect the motor itself.
What to do if my Otto Bock A200 Wheelchair shows a controller error?
If your Otto Bock Wheelchair displays a controller error, which may be caused by a defective controller, check all connections.
What to do if the brake release of my Otto Bock A200 is open?
If the brake release is open on your Otto Bock Wheelchair, check the motor brakes and the connections to the controller.
What to do if there is a communication error between control panel (joystick) and controller of Otto Bock A200 Wheelchair?
If you're experiencing a communication error between the control panel (joystick) and the controller on your Otto Bock Wheelchair, this could be due to a poor cable or loose plug connection. Check the connections to resolve the issue.
How to fix battery undervoltage on Otto Bock Wheelchair?
If you are experiencing battery undervoltage, it may be due to a battery deep discharge or a malfunctioning battery cable/faulty connection. Charge the battery and check the connection to the battery. If the connection is proper, continue charging the battery.
General| Brand | Otto Bock |
|---|---|
| Model | A200 |
| Category | Wheelchair |
| Language | English |
To Next Page
