Outback Power Systems HUB10 User Manual

3
EU Declaration of Conformity
In accordance with EN 45014:1998
We ........................................................... OutBack Power Systems
Of ............................................................. 19009 62nd Ave NE
Arlington, WA 98223 USA
Declare that:
Model name/number ................. MATE, MATE2, MATE_B, HUB4, HUB10
Has been designed and manufactured to the following speci cations:
73/23/EEC ........................................... The Low Voltage Directive and its’ amending directives
As the manufacturer, we declare that the equipment named above has been designed to comply with
the relevant sections of the above referenced speci cations. The unit complies with all essential require-
ments of the Directives.
Done at Arlington, WA USA
On 1/22/08
08

Outback Power Systems HUB10 Specifications

General

Brand	Outback Power Systems
Model	HUB10
Category	Switch
Language	English