CONTROLS
Wired Chips® have only one similarity
to your Average Joe’s headphones or
earbuds; they don’t need to be charged.
Other than that, these aren’t your mom’s
helmet audio.
There are two ways to control your
Chips®, the most convenient and
the one we recommend is through
our patented on ear button control,
but we like options, so there is also
an in-line control (they both do the
same thing).
Method 1: Use the large tactile button
that is built into the left speaker, this
will control everything other than
volume.
Method 2: The MFB button on the
in-line control cable, same function,
but smaller, harder to locate and use
with gloves on, you choose.
Oh, you can control volume two ways
also, on your phone or audio source
device and on the roller wheel.
Multifunction Button
Volume wheel
Microphone
To Next Page
Loading...
