Need help?Do you have a question about the Outline M5000-4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power | 5000W total |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >110 dB |
| Total Harmonic Distortion | <0.05% |
| Type | Power Amplifier |
| Input Impedance | 20kΩ balanced |
| Cooling | Variable speed fan |
| Weight | 12.5 kg |
| Input Sensitivity | 1.4V |
| Dimensions | 483 x 88 x 396 mm |
| Damping Factor | >500 |
Explains symbols used in the manual for safety warnings and instructions.
Provides essential guidelines and warnings for safely installing the amplifier.
Covers essential safety requirements and checks for connecting the amplifier to the mains power.
Emphasizes the importance of earth connection for safety and preventing interference.
Guides the user on connecting the amplifier to the AC mains power supply, highlighting voltage requirements.
Explains the protection mechanism that mutes channels when excessive current is drawn due to short circuits.
Details the thermal protection system, including variable speed fans and automatic power reduction or shutdown.
Describes the automatic shutdown procedure when heat sink temperature exceeds a critical threshold.
Explains the DC detection circuit that mutes channels if a DC signal appears at the output, preventing speaker damage.
To Next Page
