Output Solutions KP-200

To Next Page

1. DIAGRAM FOR SET UP..................................................................1

2. INTRODUCTION..............................................................................1

3. POWER ON SEQUENCE.................................................................1

4. EDIT MODE OPERATION..............................................................2

5. PRINT MODE OPERATION.........................................................10

6. ERASE FORMAT............................................................................11

7. ERASE ALL FORMAT ...................................................................11

8. SPECIAL FEATURES OPERATION ............................................12

Appendix A. Pin Assignment ................................................................12

Appendix B. Font Expansions ..............................................................14

Main Page

Need help?

Do you have a question about the Output Solutions KP-200 and is the answer not in the manual?

Summary

Diagram for Set Up

Introduction to KP-200 Operations

Edit Mode Operation

Operator designs or edits label formats and stores them in memory.

Print Mode Operation

Prints restored label format on the EZ-2 or EZ-4 Thermal Printer.

Erase Mode Operation

Deletes an individual label format from the memory module.

Erase All Mode Operation

Erases entire contents of the interchangeable memory module.

Power On Sequence

Edit Mode: Restore Format and Printer Selection

Restore Format from Memory Module

Restores a previously saved label format from the memory module.

Select Printer Type

Selects the desired printer type (e.g., EZ-2 or EZ-4).

Edit Mode: Paper Type and Dimensions

Select Paper Type

Selects the media type: Label, Registration Mark, or Fax paper.

Enter Label Width

Enters the label width in millimeters.

Enter Label Height

Enters the label height in millimeters, including gap.

Edit Mode: Length Settings

Enter Top Length

Defines top length based on registration mark and tear line distance.

Edit Mode: Print and Darkness Settings

Enter Black Length

Enters the black registration mark length in millimeters.

Enter Feed Length for Fax Paper

Enters the feed length specifically for fax paper.

Enter Print Speed

Sets the print speed in inches per second.

Enter Thermal Head Temperature (Darkness)

Sets the thermal head temperature for darkness level (0-7).

Edit Mode: Field and Data Type Settings

Select Self Strip Function

Enables or disables the stripper sensor option.

Field Programming

Allows editing of individual fields within a label format.

Enter Data Type

Selects data type for fields (Text or various Barcodes).

Edit Mode: Blank Line and Font Settings

Enter Blank Line

Sets the line space (distance between fields) in millimeters.

Variable Field Configuration

Configures fields for variable or fixed data input.

Font Size Settings

Sets horizontal and vertical font multipliers.

Barcode Data Field Configuration

Configures barcode data fields: ratios, height, readability.

Edit Mode: Save Format to Memory

Save Format to Memory Card

Saves the created label format to the memory card with a specified name.

Edit Mode: Set Data Field as Variable

How to Set Up Data Field as a Variable

Configures data fields as variable with length, size, and position.

Print Mode Operation Steps

Restore Form for Printing

Restores a label format from memory for printing.

Enter Form Name for Printing

Enters the name of the label format to be printed.

Wait for Loading Display

Displays loading status for the selected label format.

Erase Format Operation

Enter Form Name to Erase

Enters the name of the label format to be erased.

Confirm Format Erasure

Confirms the erasure of the selected label format.

Erase All Format Operation

Confirm All Formats Erasure

Confirms the erasure of all stored label formats.

Special Features Operations

Tab Key Functionality

Explains the function of TAB keys for inserting spaces.

Procedure for Deleting a Data Field

Describes how to delete a data field from a label format.

Procedure for Inserting a Data Field

Describes how to insert a data field into a label format.

Two Data Fields on the Same Line

Explains how to place two data fields on the same line using '&'.

Appendix A: Pin Assignment

Appendix B: Font Expansions