OUTSTORM MAXX Pro - User Manual

This document is a user manual for an electric scooter, providing comprehensive information on its operation, maintenance, and safety precautions.

Function Description

The electric scooter is designed for personal transportation, offering a convenient and environmentally friendly way to travel. It features a multi-functional display, various control buttons for speed and driving modes, and a robust folding mechanism for portability. The scooter is equipped with both single and dual-drive options, as well as Eco and Turbo modes, allowing riders to adjust performance based on their needs and preferences. It also includes a lighting system for visibility and safety.

Important Technical Specifications

The manual highlights several key technical aspects, although specific values like motor power or battery capacity are not universally provided across all sections. However, it does mention:

• Waterproof Grade: IP65, indicating protection against dust and low-pressure water jets.
• Speed: Riders are advised to keep the speed below 25 km/h or adhere to local traffic rules.
• Battery Voltage: The manual specifies under-voltage thresholds for different models: 39V for 48V E-scooters and 52V for 60V E-scooters.
• Load Capacity: Max speed is tested under a 70KG load.
• Operating Temperature: Max speed is tested at approximately 25°C. Battery capacity may decline as temperature declines, and charging is not recommended below 0°C.
• Display Models: The scooter can come with either a Y2 or LH-100 multi-functional display, each with slightly different error code systems.
• Driving Modes: Single and Dual motor drive, Eco and Turbo modes.
• Braking System: Features oil disc brakes (front and rear) and mentions the need to check brake oil and pads.
• Tires: 11-inch dual-drive tires are mentioned in the barcode example.

Usage Features

The scooter offers a range of features designed to enhance the user experience:

• Multi-functional Display: Provides real-time information such as speed, gear position (1, 2, 3), battery voltage, riding time, and accumulated mileage (ODO) or single mileage (TRIP). It also indicates error codes for troubleshooting.
• Voltage Lock with Key: A key-operated voltage lock is used to turn the scooter's power on and off, enhancing security.
• Control Buttons:
  • POWER Button: Used to turn the display on/off and to cycle through display content (TRIP, ODO, VOL).
  • MODE Button: Used to switch between gear positions (1, 2, 3).
  • ECO/TURBO Button: Toggles between Eco mode (for extended range) and Turbo mode (for higher performance).
  • SINGLE/DUAL Button: Switches between single motor drive (for efficiency) and dual motor drive (for increased power, especially on slopes).
  • Light Switch: Controls the scooter's lighting system, including double headlights, angle eyes lights, pedal lights, side lights, and tail light.
  • Turning Light Button: Activates turning signals.
  • Horn Button: Operates the horn.
• Folding Mechanism: The scooter features a multi-stage folding process for easy storage and transport, including handlebar folding, pole folding, and seat folding (if equipped).
• Height Adjustment: The T-bar height can be adjusted to suit different riders.
• Seat (Optional): Some models may include a seat, which also has a folding and height adjustment mechanism.
• Charging Ports: Equipped with two charging ports, allowing for single or dual charger use. Using a single charger is recommended to prolong battery life.

Maintenance Features

The manual outlines essential maintenance procedures to ensure the scooter's longevity and safe operation:

• Regular Charging: Charge the scooter upon receipt and after every ride. Regularly check battery status and recharge if not used for a long time.
• Screw Tightening: Periodically check and tighten all screws to ensure structural integrity.
• Brake System Check: Monitor braking performance. If it declines, check for brake oil in the tubing and add if necessary. If efficiency remains poor or audible sounds occur, replace brake pads.
• Lubrication: Every six months, apply a small amount of lubricant to the handlebar's folding mechanism. Note: WD40 should not be used, and lubrication should not be applied to the front and rear wheels.
• Tire Inspection: Replace tires immediately when they show visual signs of wear.
• Cleaning: Do not clean the scooter with a water hose or high-pressure cleaner. Avoid immersing the scooter in water to prevent motor and circuit failure.
• Barcode Preservation: Do not remove the barcode on the scooter, as it is necessary for warranty service.
• Prohibition of Modification: Any modification of the scooter is strictly prohibited and will void the warranty.
• Indoor Charging Precaution: Do not charge the scooter indoors or overnight without supervision due to fire risk. Use only company-provided chargers.

Safety Precautions

Safety is a paramount concern, and the manual details numerous precautions:

• Protective Gear: Always wear a helmet, knee pads, and elbow pads while riding.
• Speed Limits: Adhere to local traffic rules and keep speed below 25 km/h.
• Rider Restrictions: The E-scooter is for adults only and for single-person riding.
• Pre-Ride Inspection: Always perform a thorough inspection before riding, including checking the outer packing, barcode, control panel, brake grips, handlebar stability, seat firmness, horn, lights, drive switches, mode switches, and folding mechanism.
• Environmental Conditions: Avoid riding in rain or puddles. Do not ride on wet, slick, bumpy, uneven, or rough surfaces.
• Obstacle Awareness: Watch out for obstacles like sharp bumps, curbs, drainage grates, and gaps (>5cm). Avoid going up or down steps higher than 5 cm.
• Foot and Hand Placement: Ensure both feet are on the scooter and the kickstand is folded while moving forward. Keep hands on the handlebar at all times.
• Charging Safety: Do not charge indoors or without attention. Use only company-provided chargers.
• Warranty Voidance: Disassembling, modifying, using non-original spare parts, or engaging in inappropriate activities (stunts, riding on inappropriate surfaces) will void the warranty.
• Traffic Accidents/Collisions: Damage from traffic accidents or collisions is not covered by warranty.
• Natural Disasters: Damage caused by natural disasters is not covered.
• Warranty Documentation: Keep the warranty card, original purchase certificate, or proof of purchase from dealers properly for warranty claims.

This comprehensive guide ensures users can operate and maintain their electric scooter safely and efficiently, while also understanding the terms of their warranty.