EasyManua.ls Logo

Outsunny Fire pit User Manual

Outsunny Fire pit
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Assembly Instructions
Product Name: Fire pit
WARNINGS:
This fire bowl is intended for outdoor use only.
This fire bowl is intended for burning wood logs only. Do not burn coal, leaves, or other combustible
materials in the bowl.
Not for use by children. Keep children and pets away from this fire bowl.
When in use, the handle on the mesh cover can reach extremely high temperatures that can cause
serious injury to an unprotected hand. Protective gloves and long-handled tools are recommended for
use with this fire bowl.
Never leave the burning fire bowl unattended, and always extinguish the fire completely before
leaving the fire bowl.
Do not use on a wooden deck or combustible surface such as grass, leaves, mulch, etc.
Do not use fire bowl on heat-sensitive or combustible structures.
Check local fire regulations and municipal by-laws for information regarding the safe use of this
product.
Read all safety guidelines, warnings, instructions, and operating rules carefully before assembling and
using this product.
Some parts may contain sharp edges. Wear protective gloves if necessary during assembly and use.
PARTS LIST
HARDWARE LIST
Note: You will need a screwdriver to complete
the assembly.
No.
PARTS
Qty
A
Handle
1
B
Mesh Cover
1
C
Fire Bowl
1
D
Legs
4
E
Base Ring
1
F
Poker
1
No.
Hardware
Qty
AA
M6*10mm Bolt
12
BB
M6 Nut
1
842-137 EN C000000
Question and Answer IconNeed help?

Do you have a question about the Outsunny Fire pit and is the answer not in the manual?

Outsunny Fire pit Specifications

General IconGeneral
TypeFire pit
ShapeRound
Fuel TypeWood
ColorBlack
Includes Spark ScreenYes
Includes Poker ToolYes

Summary

Assembly Instructions

Parts List

Lists all components included in the fire pit kit.

Hardware List

Details the fasteners and hardware required for assembly.

Step 1: Attach Handle to Mesh Cover

Instruction for attaching the handle to the mesh cover using a nut.

Step 2: Attach Legs to Fire Bowl and Base Ring

Instruction for connecting the legs to the fire bowl and base ring using bolts.

Step 4: Place Mesh Cover and Final Check

Instruction for placing the mesh cover on the fire bowl and preparing for use.

Related product manuals