Why is my OUTXE PCPB24000WS power bank not fully charging after charging for a long time?
If you are using a 5V 2A charger, it typically takes about 10-13 hours to achieve a full charge. If you are using a 5V 1A charger, a full charge can take approximately 20-23 hours.
What to do if my OUTXE Accessories power bank doesn't charge itself properly?
Try using a different, functional USB charging cable and a 5V 2A wall charger to attempt charging again.
What to do if the last indicator of my OUTXE PCPB24000WS doesn't illuminate after charging for 10 hours?
Try using a different USB cable and wall charger (5V2A). If the last indicator flashes, it means the power bank is almost fully charged; this could be due to a resistance error or recognition issue with the charger.
Why is my OUTXE PCPB24000WS Accessories power bank battery level not changing after charging with solar for 6 hours?
It can take up to 100 hours to fully charge the power bank via solar. The charging speed is dependent on sunlight intensity, solar panel size, and the panel's conversion rate. Try charging it for a few more days, keeping these factors in mind.
Instructions for operating the LED flashlight, including turning it on/off and cycling modes.
Guide on connecting the power bank to a charger and understanding the charging indicators.
General| Battery Capacity | 24000mAh |
|---|---|
| Fast Charging | Yes |
| LED Indicator | Yes |
| Waterproof Rating | IP67 |
| Output | 5V/3A, 9V/2A, 12V/1.5A |
| Output Power | 18W |
| Input Power | 18W |
| Input Ports | USB-C, Micro-USB |
| Output Ports | USB-A, USB-C |
| Input | 5V/2A, 9V/2A |
| Ports | USB-C, Micro-USB, USB-A |
To Next Page
