3-3. Link Controller Initialization
U3-1021 3-2 11/98
Westinghouse Proprietary Class 2C
3-3. Link Controller Initialization
To perform the initial programming (or any later action requiring keyboard/CRT
I/O), a serial port (J1) on the LC is linked to the externalpersonal computer’s COM1
or COM2 port. In this configuration, code generated on the external personal
computer can be loaded into the LC.
Ovation I/O Cabinet
LC Module
J1 Port in
Personal Computer
COM1 or
COM2
Connector
(Rear View)
To Next Page
Loading...