THREE DOOR RECEIVER INSTALLATION AND
PROGRAMMING INSTRUCTIONS
41644.00919, 08/2021
INTRODUCTION
The CodeDodger® Three Door External Receiver has been designed to provide
versatility with remote control applications for residential and commercial doors
and gates. There are two primary modes of operation:
Three Door Mode: Supports up to 255 CodeDodger® remote controls and
an unlimited number of xed code remotes on up to three doors. The default
frequency is 315/390MHz for CodeDodger® remotes. When using xed code
remotes, the frequency can be changed to 360/390, 380/390, or 390/412MHz.
CodeDodger® and xed code can be used on a single door output, or on
separate door outputs.
Single Door Open/Close/Stop Mode: Supports up to 255 CodeDodger®
Open/Close/Stop remotes on a single door using dual 315/390MHz frequencies.
To Next Page
