E. OWC ClingOn-ready cable stabilizer mount – affix ClingOn to help prevent
accidental cable disconnections (sold separately)
F. USB-C 10Gb/s port – use with longer cables to extend your connection while at
home or in the office
Device Setup
• Connect the Atlas Dual SD card reader to your compatible host via the tethered
USB-C cable or USB-C cable connected to the USB-C 10Gb/s port.
• Insert an SDXC card into either card slot by aligning the memory card notches with
the internal card reader connections. The gold contacts should be facing down when
the memory card is inserted.
• If the SDXC card doesn’t insert easily the orientation might be incorrect.
Remove the card, turn the card over, and reinsert.
• The card may take up to 30 seconds for the card to be recognized when
using over iPadOS, Android, or Chrome OS.
• macOS 13.x users will have to approve the pop-up window that appears
when connecting the device.
To Next Page
Loading...