• The inserted memory cards need to be properly unmounted from the operating
system and removed from the Atlas Dual CFexpress and SD card reader before
toggling the Write Protection Switch.
• Note: Write protection will NOT enable or disable properly if toggled while the
memory cards are connected.
• Mac users will be unable to add files to memory cards while the Write protection
switch is enabled. Drag and drop becomes disabled. PC users will receive a pop-up
window stating the disk is write-protected if write access is attempted while the Write
protection switch is enabled. This message can be canceled.
• Properly unmount any connected memory cards, and remove the memory
cards from the Atlas Dual CFexpress and SD card reader. Toggle the Write
protection switch to the desired position before inserting and connecting the
memory cards
Usage Notes
• To store the tethered USB-C cable, place the USB-C connector into the cavity on the
underside of the Atlas Dual CFexpress and SD card reader, press down on the black
connector, and wrap the cable by pressing down into the notch.
To Next Page
Loading...