OWC Mercury Elite Pro Dual - Front and Rear Views of Mercury Elite Pro Dual; Front View: LED Indicators

MERCURY ELITE PRO DUAL
INTRODUCTION
2
1.4 FRONT VIEW
1.4.1 LED Indicators
Power — This LED will emit a solid blue light
when the Elite Pro Dual is on. During drive
activity the LED will blink blue steadily, and
during a rebuild the LED will pulse blue slowly.
HDD1/HDD2 — These LEDs represent
the two hard disk drives (HDDs) inside the
enclosure. During normal activity, these LEDs
will remain off. If one of the hard drives inside
the enclosure fails, or if one of the drives is
removed without the RAID mode being reset,
the corresponding LED will blink red.
1.5 REAR VIEW
Power HDD2HDD1
1
4
5
6
2
3