Need help?Do you have a question about the OWC Mercury Elite Pro Qx2 and is the answer not in the manual?
General| RAID levels | 0, 1, 5, 10 |
|---|---|
| Storage drive size | 3.5 \ |
| Maximum storage capacity | 8 TB |
| Number of storage drives supported | 4 |
| Supported storage drive interfaces | Serial ATA II |
| FireWire 400 | Yes |
| USB 2.0 ports quantity | 1 |
| Product color | Aluminum |
| Number of fans | 1 fan(s) |
| Chipset | Oxford 936 |
| Data transfer rate | 3 Gbit/s |
| Cables included | eSATA, FireWire, USB |
Details minimum system requirements for macOS and Windows, including interface compatibility.
Lists all hardware components included in the product box.
Provides information about manual content and potential product variations.
Overview of the front panel components, referencing detailed feature information.
Detailed explanation of the front panel LEDs and locking faceplate functions.
Overview of the rear panel ports and controls, referencing detailed feature information.
Detailed explanation of rear panel ports like eSATA, FireWire, USB, and power input.
Step-by-step guide for installing or replacing hard drives in the enclosure.
Procedure for initial setup and formatting using the OWC Drive Guide utility.
Instructions for setting and changing the RAID mode for the drive array.
Detailed descriptions of available RAID modes and their characteristics.
Guidance on adding, removing, or replacing drives in different configurations.
Guidance for resolving common issues with the device and its connections.
Recommendations for backing up data to prevent loss.
Links to FAQs and data migration information on the OWC website.
Information on how to contact OWC for technical assistance.
To Next Page