OWC Mercury Elite Pro Qx2 - Introduction; Minimum System Requirements; Package Contents; About This Manual

MERCURY ELITE PRO Qx2
INTRODUCTION
1
1.1.3 Supported Hard Drives
• Up to four 3.5” SATA drives (1.5Gb/s, 3.0Gb/s, or 6.0Gb/s).
• Drives of identical model and capacity are required for all RAID modes other than span
mode and independent drive mode.
• For an updated list of supported hard drives, please visit the product page online.
1.2 PACKAGE CONTENTS
USB 3.1 Gen 1 cable
(Standard-A to Standard-B)
Mercury Elite Pro Qx2
Keys
Power cable
FireWire 800 (1394b)
9-9 pin cable
eSATA (3.0Gb/s) cable
NOTE: Hard drive screws included but not pictured.
1.3 ABOUT THIS MANUAL
The images and descriptions may vary slightly between this manual and the unit shipped.
Functions and features may change depending on the firmware version. Please visit the
product web page for the most recent product specifications.
INTRODUCTION
1.1 MINIMUM SYSTEM REQUIREMENTS
1.1.1 Apple Mac Requirements
• eSATA (3.0Gb/s): OS X 10.3 or later
• FireWire 800: OS X 10.2 or later
• USB 3.1 Gen 1 (backwards compatible to
USB 2.0): OS X 10.6 or later
1.1.2 PC Requirements
• eSATA (3.0Gb/s): Windows® XP or later
• FireWire 800: Windows XP or later
• USB 3.1 Gen 1 (backwards compatible to
USB 2.0): Windows XP or later