Owlet Cam 2 Installtion Guide

3
Choose Your View
Place the Cam 2 and all cables 36 inches
(92 cm) away from the edge of the crib.
Cables within 36 inches (92 cm) of the
edge of the crib should be covered.
You can set up the Cam 2 in two ways:
1 Place it on a flat surface using the
magnetic base and adjust for
desired tilt angle.
2 Mount it on a wall above the crib
using the base as a wall mount for
a bird’s-eye view of the crib or for
an expanded view of your nursery.
The next steps will guide you through
mounting the Cam 2 on the wall
(above the crib).
You can also view our Installation Video
at support.owletcare.com

Owlet Cam 2 Specifications

General

Camera Resolution	1080p HD
Two-Way Audio	Yes
Motion Detection	Yes
Sound Detection	Yes
Field of View	130 degrees
Night Vision	Yes
Connectivity	Wi-Fi (2.4GHz)
Video Storage	Cloud storage (subscription required)
Compatibility	iOS and Android
Power Source	Power adapter (included)