Owlet Cam 2 Installtion Guide

5
1. Measure and mark
Consider which outlet to use. The
outlet should be at least 36 inches
(92 cm) away from the crib to ensure
no exposed cables will be within
baby’s reach. The next steps will
instruct you on how to cover
all cables.
Measure 36 inches (92 cm) (92 cm)
from the top of your baby’s mattress
and make a mark on the wall — this
is where the Cam 2 will be mounted.
Center this mark above baby’s crib for
the optimal viewing angle.
36 inches
(92 cm)
36 inches (92 cm)
(six cable guards)
It’s also important to consider the
location of the temperature and
humidity sensor. The temperature
sensor can be found near the end
of the smart cable on the side that
connects to the power adapter.

Owlet Cam 2 Specifications

General

Camera Resolution	1080p HD
Two-Way Audio	Yes
Motion Detection	Yes
Sound Detection	Yes
Field of View	130 degrees
Night Vision	Yes
Connectivity	Wi-Fi (2.4GHz)
Video Storage	Cloud storage (subscription required)
Compatibility	iOS and Android
Power Source	Power adapter (included)