3
Getting your Cam 2 installed
The Cam 2 can be installed and
mounted two different ways: in a
birds eye view or on a flat surface.
Place the Cam 2 and all cables 36 inches
(92 cm) away from the edge of the crib.
Cables within 36 inches (92 cm) of the
edge of the crib should be covered.
1 Place it on a flat surface using the
magnetic base and adjust for
desired tilt angle.
2 Mount it on a wall above the crib
using the base as a wall mount for
a bird’s-eye view of the crib or for
an expanded view of your nursery.
The next steps will guide you through
mounting the Cam 2 on the wall
(above the crib).
You can also view our Installation Video
at support.owletcare.com
To Next Page
Loading...
