Owlet Cam 2 User Manual

5
1 Measure and mark
Measure 36 inches (92 cm) from the
top of your baby’s mattress and make
a mark on the wall — this is where the
Cam 2 will be mounted. Center this
mark above baby’s crib for the optimal
viewing angle.
Consider which outlet to use. The
outlet should be at least 36 inches
(92 cm) away from the crib to ensure
no exposed cables will be within
baby’s reach. The next steps will
instruct you on how to cover
all cables.
It’s also important to consider the
location of the temperature and
humidity sensor. The sensor can
be found near the end of the smart
cable on the side that connects to the
power adapter. It is best to ensure
the temperature sensor is not directly
above a heat or air vent to get more
accurate readings around the room’s
overall comfort levels.
36 inches
(92 cm)
36 inches (92 cm)
(six cable guards)

Owlet Cam 2 Specifications

General

Camera Resolution	1080p HD
Two-Way Audio	Yes
Motion Detection	Yes
Sound Detection	Yes
Field of View	130 degrees
Night Vision	Yes
Connectivity	Wi-Fi (2.4GHz)
Video Storage	Cloud storage (subscription required)
Compatibility	iOS and Android
Power Source	Power adapter (included)