6
ZigBee button
Wi-Fi button
USB-A
Micro-usb
ZigBee button
• Permit join: Press and hold it for 2 seconds until the Sub-
devices indicator flashes rapidly to allow sub-devices to join
the gateway which will last 2 min,
you can hold it again for 2
seconds to exit it.
②
Button
System-initiated
After you reset the gateway or when it is powered on, the Cloud
connection indicator and the Wi-Fi / Sub-devices indicator will be
always-on at the same time.
Firmware upgrade
When the gateway rmware is upgrading, the Cloud connection
indicator and the Wi-Fi / Sub-devices indicator will ash slowly at
the same time.
To Next Page
Loading...
General