oxtools.com
12
near the button. The automatic self-leveling will be
activated if the laser level is within the ±3° self–leveling range.
Working in Pulse mode with a detector:
For outdoor work under direct sunlight, or bright conditions
and for extended indoor ranges up to 60 meters, use the
pulse mode with a Detector.
When the pulse mode is activated the laser lines will flash at
very high frequency (Invisible to the human eye) this will allow
the detector to detect the laser lines.
1. The pulse mode can be activated in Automatic and Manual
modes.
2. To switch on the Pulse Mode press the P button, the green
LED near the P push button will light up.
To Next Page
Loading...