Oxford Oximiser 3X User Manual

USER MANUAL
For charging most 12 Volt batteries 4.0 - 125Ah
FR MODE D’EMPLOI
Chargeur de batterie multimode
professionnel pour un entretien
optimise.
Pour la plupart des batteries de
12 V de 4,0 à 125 Ah.
IT MANUALE D’USO
Caricabatteria e ottimizzatore di
carica professionale a tecnologia
switch
Compatibile con la maggior parte
delle batterie da 12 V (4,0-125 Ah)
SE ANVÄNDARHANDBOK
Professionell batteriladdare
med lägesomkopplare och
konditionsoptimering.
Laddar de flesta 12-voltsbatterier
från 4.0 – 125 Ah
NL GEBRUIKERSHANDLEIDING
Professionele acculader met schakelmo
dus en conditieoptimalisatie
Voor het opladen van de meeste 12 Volt
accu’s van 4.0 – 125Ah
PL PODRĘCZNIK UŻYTKOWNIKA
Profesjonalny prostownik i
kondycjoner akumulatora z trybem
przełączania
Umożliwia ładowanie większości
12-wol towych akumulatorów o
pojemności 4,0 - 125 Ah
DE BEDIENUNGSANLEITUNG
Professionelles Batterielade- und
Konditionierungsgerät mit Switch-Mode-
Technologie
Zum Laden gängiger 12-Volt-Batterien
mit 4,0-125 Ah
ES MANUAL DEL USUARIO
Cargador de baterías y optimizador
de acondicionamiento profesional
con modo conmutador
Para cargar la mayoría de baterías
de 12 Voltios 4,0 – 125Ah
www.oxprod.com

Oxford Oximiser 3X Specifications

General

Output Voltage	12V DC
Protection	Yes
Charging Current	3.6A
Output Current	3.6A
Battery Type	Lead Acid
Battery Capacity	Up to 125Ah
Charging Stages	7
Battery Compatibility	12V
Protection Features	Short Circuit, Overcharge, Reverse Polarity

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for operating and handling the battery charger.

Introduction

Lithium Battery Charging Warning

Important warning about using the correct mode for Lithium batteries to avoid damage.

Process Automatic Charging Cycle

1. Polarity Test

Checks connection polarity before charging.

2. Analyse

Assesses battery condition (lightly/deeply discharged, damaged).

3. Recover (Soft Start) Mode

Gentle charge for deeply discharged batteries below 8.0V.

4. Charge (Bulk) Mode

Charges battery at constant current up to 80-90%.

5. Maintain (Absorption) Mode

6. Voltage Retention Check

7. Advises Battery Condition

8. Monitoring Mode

Connection and Charging Procedures

DC Connection Precautions

Battery Installation in Vehicle

Charging Batteries Outside Vehicle

Starting the Charging Process

Specification

Technical Specifications