1. Remove and recycle or discard all stickers,
descriptive labels, cable ties and packing
materials, including static stickers and hangtags
with ties.
2. Detach and carefully wash blending shaft with
warm water and mild detergent. Rinse and dry
thoroughly. Do not put in dishwasher.
3. Wipe body of appliance with a soft, damp cloth
and dry thoroughly.
CAUTION: Do not put Blender motor body in dishwasher or immerse in water.
Do not use abrasive pads, harsh chemicals or spray cleaner chemicals to clean
your Blender.
1. Attach shaft to corresponding
end of motor body until shaft
clicks and locks into place.
2. Plug into 110V outlet. Headlight
will be softly lit to indicate
Blender is on.
3. Select desired speed by twisting
the speed control ring and then
place nylon head into ingredients.
4. Press and hold the button on
motor body to start blending.
The headlight will brighten for
better visibility.
5. To learn more about how to use your Blender,
check out “The Particulars of Blending” on pg. 9.
Before We Begin Quick Start Guide
65
To Next Page
Loading...