OXO LIPS 16 - Product Overview; Front Panel Components; Operation Guide; Setting DMX Start Address

User Manual - LIPS 16 V1.1 11/2017 5/12
3. Overview
PUSH
POWER DMX O UT
Dc I nput :
9VDC, 300mA
Made in PRC 23-001-1951
1=Gr ound
2=Da ta-
3=da ta +
1. Power Input DC 9V, 300mA Min
2. Power Switch Turn on/off the mains power
3. DMX Output 3-pin XLR female socket
4. Fader
5. Mode
6. Up
7. Down
8. Master Fader
4. Operation guide
1. When switching on the power supply, the LED window will display the start DMX channel
address. It can be «A001». If there are no character and number display, check the power
whether it’s correctly connected.
2. The default start address for controlling the DMX channels is channel 1. To adjust the initial
start address, you can press the Up key to increase it by 1. When holding the Up key for 1
second, the start address will increase rapidly from the initial value to the desired value. You
can also press the Down key to decrease the present value by 1. When holding the Down key
for 1 second, the present value will decrease rapidly to the desired value.