Need help?Do you have a question about the Oxygen 8 NOVA Series and is the answer not in the manual?
Explains warning and caution symbols and their meanings.
Describes model nomenclature and details unit components and options.
Overviews unit features, certifications, casing, electrical, controls, and options.
Table detailing electrical specs for various models (Nom. V., Motor kW, FLA, MCA, MROP D, Rcmd Fuse).
Tables showing ERV performance data (Airflow, SRE, LRE, TRE, PD) for different models.
Tables detailing fan performance data (CFM, Voltage, FLA, KW, SP "Wg) for various models.
Graphical representation of fan performance curves for specific models.
Technical drawings showing dimensions for various unit models.
Explains setting fan speed, air volume control, and the system's start-up sequence.
Describes different fan control strategies based on pressure, flow, VOC/CO2, and motor speed.
Details setting pressure transmitter ranges and fan control for constant pressure operation.
Explains setting supply and return fan flow setpoints for constant flow operation.
Explains how to maintain constant CO2 levels by controlling air volume.
Describes how to compensate ventilation based on outdoor temperature.
Details how to configure digital outputs to follow A-alarms and B-alarms.
Details how to control room temperature using a room sensor or external setpoint.
Describes cooling function availability, settings, and recovery options.
Explains the function of cooling the room using fresh cold air without active cooling.
Explains how to humidify supply air using a humidity sensor and controller.
Describes the process of lowering room humidity using dehumidification control.
Details automatic switching between operating modes based on outside temperature or calendar.
Explains how to lock fan speed for VAV installations and system adjustment.
Details setting communication parameters for external connectivity and BMS integration.
Details BACnet setup and language selection for the controller.
Describes how to retrieve, save, and restore factory settings using the hand terminal or SD card.
Explains how to set operating times and weekly programs for system control.
Describes how to set start and stop times for operating periods in daily or weekly programs.
Explains how to configure calendar programs and set basic operation modes.
Explains how to set standard daily patterns and configure exceptions.
Details how to set up schedules for exceptions to the normal operating pattern.
Explains how to set up calendar periods and manage extended operation modes.
Details how to change temperature setpoints for various control types.
Explains how to set the system's time and date, including automatic summer time.
Details how to manage alarms and logs, including alarm forecast and log viewing.
Provides an overview of the system's current status and operating conditions.
Details how to set up email notifications for system alarms.
Provides safety warnings and instructions for cleaning the unit's fans.
Instructions for first-time use, air distribution, and cleaning of DX coils.
Instructions for first-time use, air distribution, and cleaning of hydronic coils.
Recommends cleaning the exchanger annually and provides instructions for winterizing.
Details filter sizes, dimensions, quantity, and MERV ratings for various models.
Provides a table of fuse sizes required for different models and voltage configurations.
Shows system status and explains the override function for testing unit outputs.
Explains how to access and set service parameters for ventilation components.
Details service parameters for cooling and heat recovery configurations.
Explains settings for inlet, return, and exhaust fans (delayed start, K-factor).
Details how to set up filter monitoring using pressure transmitters and alarm limits.
Explains dynamic filter monitoring and zero calibration of pressure transmitters.
Details parameters for water battery pre-heaters, including pump operation and frost protection.
Details parameters for electric battery pre-heaters, including after-cooling time and monitoring.
Details parameters for water battery 1 heating, including pump operation and frost protection.
Details control types and minimum flow settings for electric battery 1 heating.
Details parameters for water battery 2 heating, including pump operation and frost protection.
Details parameters for water cooling, including pump operation and valve setpoint.
Details parameters for multipurpose battery cooling/heating, including pump and frost settings.
Details parameters for the inlet humidifier, including setpoint and sensor configuration.
Details parameters for heat recovery, including ice protection and efficiency settings.
Displays terminal connections for the unit's various modules and sensors.
Explains internal fire alarm monitoring using inlet and exhaust sensors.
Details how to manage alarms and logs, including alarm forecast and log viewing.
Lists alarm numbers and their corresponding WEB and HTERM text descriptions.
To Next Page
General
