OYEN DIGITAL U32 Shadow - User Manual

U32 Shadow™ SSD Version
User Guide
(3) Connecting the Drive
Connecting the drive:
1) Connect the drive to a computer using the included USB cable.
2) Wait 5-20 seconds for the computer to recognize the drive.
3) The drive is now ready for use.
Notes:
• Front USB ports of a desktop computer may not be able to
provide adequate power. We recommend connecting to rear ports.
• A USB port on an ExpressCard may not be able to
provide adequate power.
• If connecting to a USB Hub, make sure it is a powered Hub (one
that uses an AC adapter).
Data transfer speeds depend on the host computer port.
LED
/8

Summary

Specifications

Interface and Data Transfer

Details connection interface (USB 3.0) and data transfer rates for USB 2.0/3.0.

System Requirements

Lists compatible operating systems for Windows and Mac.

Environmental Conditions

Specifies operating and storage temperature/humidity ranges.

Power and LED Status

Describes power source and LED indicator meanings for drive status.

Detailed View

LED Indicator Guide

Explains the meaning of the LED status lights (off, solid, flashing).

Connecting the Drive

Connection Steps and Notes

Step-by-step guide to connect the drive and important notes on power and hubs.

Formatting the Drive

Reformatting Instructions

Links to guides for reformatting the drive on Windows and Mac OS.

Using the Drive

Basic File Transfer

Instructions for copying files using drag-and-drop.

Time Machine Backup (Mac)

Steps to set up the drive for automatic backups with Time Machine.

Disconnecting the Drive

Safe Removal Procedures

Details safe disconnect methods for Windows and Mac operating systems.

Warranty Information

Safety Information

Frequently Asked Questions (FAQs)

Bus Power and Linux Compatibility

Addresses bus power requirements and exFAT/Linux setup for the drive.

OYEN DIGITAL U32 Shadow Specifications

General

Brand	OYEN DIGITAL
Model	U32 Shadow
Category	Storage
Language	English