DD-75-193 R(0) Y.T.31.03.17
3
GLASS LINE A1
TECHNICAL SPECIFICATIONS
DD-72-147 R(16) 1 / 2 Y.T.04.04.2017
Power Requirements :110/220-240V. 60/50Hz. AC (%±10) 24V.DC at standby ~2W.max. ~65W. System is
powered by a well regulated SMPS which can automatically compensate for voltage fluctuations.
Dimensions : Cylindrical body 1030mm x Ø230mm x Wing width (550 / 900mm)
Body Features : 1mm thick, single piece, 304-Grade satin finished stainless steel cylindrical body.
Wing Features : Wing is made of 10 mm thick tempered glass (Opt.polycarbon or acrylic). 550 mm or
900 mm wing lengths are available as standard choices.
Top Lid Features : Standard 20mm thick natural granite (Star Galaxy Black) stone top lid for a decorative
and aesthetical appearance (opt. tempered glass, stainless steel, wood).
Indicator Features : Built-in circular RGB LED status indicators are located under the top lid. Illumination is
blue at stand-by; green during authorised passage, flashing red for unauthorised
attempts and green for emergency alert mode.
Operating Temperature, Humidity, IP Rating, MCBF
: -20°C - +68°C (Opt. -50°C with heater unit) / RH 95% non-condensing /IP 44 Indoor
Model (IP 56 is available for optional pipe wing versions)/ 1M Cycles.
Control System : All inputs are opto-coupler protected. Controlled by dry contact or grounding input.
Compatible with all access control systems that provide dry contact or grounding
outputs. Optional RS232/RS485/TCP IP control module is available.
Weight : ~58kg (with 90 cm. tempered glass wing and granite top cover).
To Next Page
Loading...
