OZCO 56621 - User Manual

56621
Hex Cap Nuts
(10 per package)
56622
Dome Cap Nuts
(10 per package)
Both Cap Nuts function the same.
Hex Cap Nuts are standard on many products.
Dome Cap Nuts are standard on hinges, but
are suitable for use in place of Hex Cap Nuts
for decorative applications.
Both shown in exploded view
1
Installation Instructions
Hex Cap Nuts (56621) & Dome Cap Nuts (56622)
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, Cap Nuts

Summary

Cap Nut Product Information

Suggested Tools for Installation

Hex Cap Nut Installation Guide

Step 1: Securing Timber Screw

Details the process of securing the timber screw using the Hex Cap Nut driver and power driver.

Step 2: Securing the Hex Cap

Explains how to secure the Hex Cap onto the installed timber screw, emphasizing finger-tightening.

Dome Cap Nut Installation Guide

Step 2: Securing the Dome Cap

Illustrates the process of securing the Dome Cap onto the timber screw, requiring finger-tightening only.

Disassembly Procedures

Removing Hex Cap Nuts

Instructions for removing Hex Cap Nuts, suggesting lubricant and a 3/8" driver for difficult removals.

Removing Dome Cap Nuts

Guidance on removing Dome Cap Nuts, recommending a rubber mallet tap and finger removal.

OZCO 56621 Specifications

General

Brand	OZCO
Model	56621
Category	Industrial Equipment
Language	English