step 2
securing Dome Cap
screw Cap on
base finger
tight ONLY
use this end
on Timber
Screw
3/8" driver
(not included)
Dome Cap Nut
shown with Timber Screw
(not included)
4
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, Cap Nuts
Dome Cap Nut Installation
To Next Page
Loading...