Ozdoken VPHE - Page 48

QUICK SETTING TABLE
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “4” or “5”
SELECTORS (SINGULATORS)
A SELECTOR SETTING
Outer selector handle should be fixed to hole
no. “10” or “11”
OVERFLOW PLATES
C1 plate should be fixed to hole No. “2”
SEEDING DISC
• Ø3.5mm hole diameter
• Nail mixer
• Preferably “72” holes
We recommend, to set your machine to the following values for Cotton seeds.
COTTON SEED
48