SUNFLOWER SEEDS (Big Size)
SEEDING DISC
• Ø4mm hole diameter
• Special THIN round mixer
• Preferably “13” holes
SELECTORS (SINGULATORS)
A SELECTOR SETTING
Outer selector handle should be fixed to hole
no. “12” or “13”
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “8” or “9”
B SELECTOR - ATTENTION: REMOVE
The standard selector plate located on The Internal
selector will be removed. Instead of this special selector
plate for this seed will be attached. With this special
selector plate, a seeding disc with THIN nail mixers
must be used. Never use this plate with other seeding
discs. It damages the machine.
OVERFLOW PLATES
• Only C3 plate should be attached.
• C1 plate will be removed.
QUICK SETTING TABLE
We recommend, to set your machine to the following values for Sunflower seeds.
50
To Next Page
Loading...