Troubleshooting
If your fan fails to operate, please follow these procedures prior
to contacting customer service:
PROBLEM PROBABLE CAUSE SOLUTION
Fan is not
turning on.
A. Fan is not
plugged into a
120V AC, 60Hz
polarized outlet/
receptacle.
B. Breaker/fuse has
been tripped.
C. Fuse inside plug
of fan is blown.
A. Ensure unit is in the OFF
position. Plug in unit
and attempt to turn on
again.
B. Please check your
electrical box to
has not been “tripped”.
Ensure unit is in OFF
position. Plug in unit
and attempt to turn
on again. Attempt to
plug unit in another
receptacle in the house
C. First unplug fan from
outlet, then replace
fuse by following
fuse replacement
instructions in this
manual.
Fan is on but
air coming
out of it is
not strong
enough.
There is dust build
up at the back of
the fan.
Turn fan OFF and unplug.
Using a crevice tool
attachment, vacuum over
the grilles located at the
back of the fan to remove
dust build-up. Plug in unit
and turn fan back ON to
resume normal operation.
12
To Next Page
Loading...
