5
COMPLETED
FAN
CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT
POSITION ONLY. DO NOT LAY FAN ON ITS SIDE OR IN
ANY OTHER POSITION. DOING SO MAY CAUSE DAMAGE
TO THE FAN AND/OR PERSONAL PROPERTY. DO NOT
USE THIS FAN WITHOUT ITS BASE.
Operating Instructions
1. Remove the cable tie and unravel the cord set before
operation.
2. DO NOT use outdoors.
3. Plug fan into a 120v, 60Hz outlet.
The control panel and the remote of this fan are equipped
with an LED display and functions (Power, Speed, Airow
Mode, Timer, Auto Thermostat, Oscillation Angle, and
LED Dimmer. For your convenience, the buttons on the remote
are designed to function in the same way as the keys on the
fan’s control panel. The LED display has lights that illuminate
to indicate the fan’s active functions.
Press this button to power the fan ON. When the fan
is ON, the power light on the LED display will be illuminated. Once
the fan is ON, you may proceed to set the following functions. To
power OFF, press this button again.
STEP 2:
Hold the base upright
(the side with a smooth
surface) and thread the
power cord through
the center hole. Bring it
up to meet the fan and
ensure that the screw
holes on both are
aligned. Secure
together with the 3
screws provided.
To Next Page
Loading...
