ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Fence Securing Knob
2. Depth Adjustment Knob
3. Front Shoe
4. On/Off Switch
5. Lock Off Button
6. Rear Shoe
7. Base Park Shoe
PLANER
KNOW YOUR PRODUCT
1. ADJUSTING PLANING DEPTH
1. Increase cutting depth.
3. The numbers on
the depth adjustment
correspond to the
planing depth (mm).
Always test on a
scrap workpiece rst.
2. Decrease cutting
depth.
8. Guide Fence
9. Spanner
ACCESSORIES
SETUP & PREPARATION
Before you make any adjustments, make sure the power cord
is disconnected from the electricity supply
Planing depth can be adjusted between 0 and 1mm.
To Next Page
Loading...
