To Next PageTo Next PageWhy does my Ozito Air Compressor start but there is no pressure?
If your Ozito Air Compressor starts but isn't building pressure, possible reasons include: * A leak in the non-return valve: Consider replacing the non-return valve. * Damaged seals: Check the seals. If any are damaged, have them replaced by a service center. * The drain plug leaks: Try tightening the lever by hand. Inspect the seal and replace it if needed.
What to do if my Ozito ACP-2419 starts but there is no pressure to the air tool?
If your Ozito Air Compressor starts and the pressure gauge shows pressure, but no pressure reaches the air tool, consider the following: * **Loose hose connections:** Check the compressed air hose and tools. Replace if necessary. * **Leak in a quick-lock coupling:** Inspect the quick-lock coupling and replace it if needed. * **Insufficient pressure set on the pressure regulator:** Open the pressure regulator further.
What to do if my Ozito ACP-2419 Air Compressor does not start?
If your Ozito Air Compressor isn't starting, there are several potential causes: * **No power supply:** Ensure the power supply is working and check the power plug and socket-outlet. * **Insufficient supply power:** Make sure the extension cable isn't too long. * **Outside temperature is too low:** Avoid operating the compressor when the outside temperature is below 5°C. * **Motor is overheated:** Allow the motor to cool down. Also, identify and fix the reason why the motor overheated.
General| Brand | Ozito |
|---|---|
| Model | ACP-2419 |
| Category | Air Compressor |
| Language | English |
