MAINTENANCE
15
• When not in use, the drill should be stored in a dry, frost free location, out of
reach of children.
• Keep ventilation slots of the drill clean at all times and prevent any foreign
matter from entering.
• If the housing of the drill requires cleaning, do not use solvents but a moist soft
cloth only.
• Blow out the ventilation slots with compressed air periodically.
Note: Ozito Industries will not be responsible for any damage or injuries caused by
repair of the drill by an unauthorised person or by mishandling of the drill.
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
Most common spare parts listed below
Spare Part Part No.
18V Battery Pack SPCDL018-37
Charging Stand SPCDL018-38
Charging Adaptor SPCDL018-39
SPARE PARTS
To Next Page
Loading...
