Ozito CDL-018 User Manual

Safety precautions for mains-powered tools, including extension lead use.

Steps for the first battery charge, time, and conditioning for optimal performance.

Procedures for subsequent charging cycles after normal tool usage.

Advice on temperature, storage, and handling the charger during charging.

Correct procedure for inserting the battery into the drill body.

Procedure for safely detaching the battery from the drill.

Explanation of primary controls: speed switch, direction selector, and torque adjustment.

How to adjust drilling speed by varying trigger pressure.

Using the forward/reverse selector to change the drill's rotation.

How to set the drill's torque clutch for driving screws and preventing damage.

Using the keyless chuck to install and remove drill bits and driver accessories.

Steps for securing and releasing drill or driver bits properly within the chuck.

General advice for drilling, including material-specific methods, speed control, and hole preparation.

Understanding battery charge status LEDs and using the built-in LED for work area visibility.