EasyManua.ls Logo

Ozito OZDB45JA User Manual

Ozito OZDB45JA
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DEMOLITION BREAKER
45 Joules MODEL NO. OZDB45JA
OPERATING INSTRUCTIONS
www.ozito.com.au
For our full range visit
Question and Answer IconNeed help?

Do you have a question about the Ozito OZDB45JA and is the answer not in the manual?

Ozito OZDB45JA Specifications

General IconGeneral
Power450W
Chuck Size13 mm
Drilling Capacity in Steel10mm
Drilling Capacity in Wood25mm
Drilling Capacity (Masonry)13mm
No Load Speed0-3, 000 RPM
Impact Rate0-48, 000 BPM
Voltage230-240V ~ 50Hz

Summary

Operating Instructions

1 Year Replacement Warranty

Details the 12-month warranty period for the Ozito tool.

Specifications

Introduction and Safety

Electrical Safety

Covers electrical safety for 230-240V, double insulation, and cord replacement.

Using an Extension Lead

Advises on using approved, undamaged extension leads and unwinding them.

General Safety Guidelines

Work Area Environment and Personal Safety

Emphasizes clean, well-lit areas, appropriate dress, PPE, and staying alert.

Operational Safety Practices

Covers electrical safety, securing work, removing keys, extension leads, and tool usage.

General Safety (Continued)

Pre-Use Inspection and Handling

Details checking for damage, unplugging, avoiding unintentional starts, and cord care.

Maintenance and Repairs

Covers dust extraction, storage, tool maintenance, authorized repairs, and cord replacement.

User Restrictions

Specifies that young children and infirmed persons require supervision.

Demolition Breaker Safety

Breaking into Walls and Floors

Advises checking for concealed cables or pipes before breaking into structures.

Safe Tool Handling and Operation

Covers using the front handle, keeping cord clear, insulated grips, and vibration.

Personal Protective Equipment (PPE)

Recommends hearing protection and protection against hazardous dust.

Operation

Accessory Management Safety

Emphasizes disconnecting power before attaching or removing accessories.

Front Handle Adjustment

Explains how to adjust the front handle for better control and support.

Dust Cover Installation

Details the procedure for fitting the dust cover to protect internal components.

Fitting and Removing Accessories

Provides step-by-step instructions for attaching and detaching bits.

Operation (Continued)

Accessory Securing and Removal

Covers locking the accessory shank and the removal process.

Trigger and Lock-On Controls

Explains the functionality of the on/off trigger and the lock-on button.

Cold Weather Operation

Describes the procedure to warm up the tool in cold temperatures.

Maintenance Procedures

Gearbox Lubrication

Details replenishing gearbox grease after 50 hours of use.

Cleaning and Dust Removal

Advises blowing air through housing and using a damp cloth for cleaning.

Carbon Brush Replacement

Explains symptoms of worn brushes and recommends professional replacement.

Warranty Information

Warranty Form and Receipt Retention

Advises retaining the warranty form and purchase receipt at all times.

Customer Service and Support

Provides customer service helpline numbers and information needed for calls.

1 Year Replacement Warranty Terms

States the 12-month warranty period for DIY use and conditions.

Warranty Voiding Actions

Lists specific actions that will render the warranty invalid.

Related product manuals