Need help?Do you have a question about the Ozito OZRH1100A and is the answer not in the manual?
General| Power | 1100W |
|---|---|
| Impact Energy | 5.0 J |
| No Load Speed | 0-850 min-1 |
| Impact Rate | 0-3900 bpm |
| Drilling Capacity in Concrete | 26 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 40 mm |
| Weight | 5.5 kg |
| Chuck Type | SDS Plus |
| Tool Holder | SDS Plus |
| Blows Per Minute | 0-3900 bpm |
Lists the main attributes and components of the rotary hammer drill.
Advises reading the manual and following basic safety precautions for mains-powered equipment.
Details voltage requirements, double insulation, and precautions for damaged power cords.
Covers keeping the work area clean, environmental considerations, attire, and protective gear.
Includes avoiding electric shock, maintaining balance, securing work, and proper tool usage.
Covers checking for damage, unplugging, cord care, storage, maintenance, and user restrictions.
Advises on wall drilling checks, side handle use, cord management, vibration exposure, and hot accessories.
Warns about hazardous dust from construction activities and recommends protective equipment.
Explains how to attach and adjust the side handle, depth rod, and SDS plus accessories.
Details fitting the dust cap, using the chuck adaptor, and inserting bits into it.
Describes the on/off switch operation and how to change drilling modes.
Explains the Hammer Drilling, Chiselling, and Drilling modes and their respective selector settings.
Details gearbox grease replenishment, cleaning procedures, and carbon brush replacement.
Outlines the 3-year replacement warranty, conditions for voiding it, and exclusions.
To Next Page
