Need help?Do you have a question about the Ozito OZRH1500WAK and is the answer not in the manual?
General| Brand | Ozito |
|---|---|
| Model | OZRH1500WAK |
| Category | Rotary Hammer |
| Language | English |
Adjusts and secures the side handle for better tool control and stability during operation.
Allows drilling holes to a predetermined depth by setting the rod's position.
Details on using SDS+ accessories, fitting, and their movement characteristics.
Step-by-step guide on how to correctly insert and secure SDS+ accessories into the tool holder.
Instructions for safely removing SDS+ accessories from the tool holder after use.
Information about the combined SDS+ shank and 13mm keyed chuck adapter.
Recommendation for lubricating SDS+ accessory shanks to ensure proper function and longevity.
Step-by-step guide on how to insert drill bits into the 13mm keyed chuck.
How to fit and use the dust cover to minimize dust and debris entering tool vents.
Explanation of how to operate the tool's on/off switch for starting and stopping.
Instructions on how to change between different drilling modes (hammer, chisel, drill).
Details on setting the tool for chiseling or chipping masonry with hammer action only.
Instructions for setting the tool to drill mode for timber or steel without hammer action.
Guidance on when and how to replenish gearbox grease for optimal tool performance.
Information about carbon brush wear, replacement, and potential tool damage.
Troubleshooting steps for when the hammer function does not impact.
Explains normal sparking and identifies excessive sparking as a potential issue.
Identifies worn carbon brushes as a cause for excessive sparking or tool failure.
To Next Page
