!
!
MAINTENANCE
11
• After each use it is recommended you disinfect the blades by using
methylated spirits. These help prevent the spread of disease to other plants
and shrubs the next time you are pruning.
• If the enclosure of the tool requires cleaning do not use solvents but a moist
soft cloth only. Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
Warning! Ensure that the lock-off switch and trigger are not accidentally
depressed during cleaning/maintenance.
Note: Ozito Industries will not be responsible for any damage or injuries caused
by repair of the pruner by an unauthorised person or by mishandling of the pruner.
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
Most common spare parts listed below
Spare Part Part No.
Moving Blade SPPRL072-06
Fixed Blade SPPRL072-09
Switch SPPRL072- 14
Switch Trigger SPPRL072-17
Blade Assembly Kit SPPRL072-35
Charging Adaptor SPHTL072-36
SPARE PARTS
To Next Page
Loading...