3
1
4
2
GUIDE
GET TO KNOW
EVO
1
2
CHARGE
Evo comes partially charged. Get a full charge for
maximum use.
1. Plug the USB Cable into Evo’s Micro USB Port.
2. Plug the other end of the USB Cable into any
USB port or power adapter.
3. Evo’s lights turn solid green when fully charged.
When a red light flashes on Evo’s back side, it is
time to charge again.
Press and quickly release Evo’s power button to turn on.
Evo will light up and begin interacting with you right away.
Press and quickly release the power button again to turn off.
Claiming Evo(s) upon setup allows you to update Evo’s firmware as needed. Use the following steps to claim
Evo from a Bluetooth™—enabled tablet or phone:
1. Make sure you have the most recent version of the Ozobot Evo companion app installed (v.1.1.89 or
newer on both iOS and Android).
2. Enable Bluetooth™ on your device and make sure Ozobot is turned on (if you have multiple Evos, make
sure the ones you are not claiming are powered off).
3. From the home page of the Evo Companion app, your Ozobot will show up in “Nearby Evo” at the bottom
of the screen.
4. Tap on the Evo you wish to claim and select “claim.”
5. Name Evo.
POWER
ON/OFF
CLAIM
EVO
3
4
Micro USB
charging port
IR Sensors
Front
Back
Line
sensors
Color
sensor
Wheels
Front LED
Lights (5)
Top LED
Light
Power
button
©2017 Evollve Inc.
To Next Page
Need help?
General
