You will need:
Ozobot Bit
Tablet or Computer
To program: To learn and play:
To get help: To share:
• Go to ozoblockly.com on your
computer or tablet.
• In the OzoBlockly Editor, choose a
mode and start to drag and drop
blocks.
• Load your program onto Ozobot.
(See instructions below)
• Play the OzoBlockly games
(games.ozoblockly.com)
• Check out the examples and
challenges in the right pane of the
OzoBlockly editor.
• Go to Ozobot’s STREAM education
website (ozobot.com/learnzone) to
download lessons, activities and
other instructional materials.
ï)RUKHOSZLWKVSHFLĆFEORFNVVHHWKH
reference guide in the right pane of
the OzoBlockly editor.
• See calibration and loading help by
pressing the “Help” button in the
lower left of the opened load tab.
• In the OzoBlockly editor, save your
program using the save icon at the
ORZHUULJKWWRGRZQORDGWKHĆOH
then share with friends.
• Share with us by sending your
program to OzoEDU@ozobot.com
Click “Help” button in editor for complete instructions
To load and run:
X
1 2
3 4
Press “Load Ozobot” and the load tab will
come up from the bottom of the screen
Load program
to Ozobot.
Run program by double
pressing Ozobot’s
on/off button.
Note: If you are using a printed or drawn map, be sure to
calibrate Ozobot on the paper before running program.
Calibrate Ozobot
to the screen
Load Ozobot
Load
Blockly
Ozo
Getting Started
To Next Page
Need help?
General
