Ozobot EVO User Manual

Too Sharp! Just Right Just Right
Too Thin!
Too Thick!
Inconsistent!
Just Right
Too Close! Just Right
COLOR CODE TIPS
PAPER
CALIBRATION
DRAWING
LINES
Press & hold Ozobot’s
Power Button for 2-4
sec. until top light
blinks white. Then,
release Power Button.
Ozobot blinks green when
calibrated. If Ozobot blinks red,
start over from step 1. Evo also
spins during calibration.
Make sure Ozobot is
powered off, then
place it in a black circle
slightly bigger than
Ozobot. If you are
using markers, create
this circle using a black
marker.
Press the Power Button to turn Bit back on.
Evo powers on automatically after calibrating.
1
2
3
4
ozobot.com
© Ozobot Inc.
X
2-4 sec.

Ozobot EVO Specifications

General

Weight	0.5 oz
Battery Life	60 minutes
Charging Time	60 minutes
Connectivity	Bluetooth Smart
Type	Educational Robot
Compatibility	iOS and Android devices
App	Ozobot Evo App
Sensors	Optical, proximity
Programming	OzoBlockly, Color Codes
Control Method	App
Charging	Micro USB
Battery	LiPo
Languages	OzoBlockly supports multiple languages
LEDs	RGB LEDs