Ozone BV1 - UNDER-SEAT PROTECTION REMOVAL;INSTALLATION

7
UNDER-SEAT PROTECTION REMOVAL/INSTALLATION
The BV1 features a certied EN/LTF/CE inatable under seat protector. Cleverly designed, it offers excellent impact absorption
propertiesdespitethelowweightandvolume.Theprotectionisinplaceupondelivery,butrequiresinatingbeforeuse.Shouldyou
needtoremoveitorreplaceitpleasefollowtheinstructions.
Theprotectionislocatedinthepocketfoundundertheseat,toremove
theprotectionfromtheharnessrstyouneedtoremovethestopperfrom
theinationpipefoundinthemainrearpocket.Unlockthestopperand
slideitoffthepipe.
Openthepocketfoundundertheseatandwiththeprotectiondeated,removeitwhilstfeeding
thepipethroughtheholefromtherearcompartment.