Why is my Ozoneair PURIFY GO not starting?
If your Ozoneair Air Cleaner isn't starting, there are a few potential reasons. First, ensure the unit is turned on by pressing the menu button or using the remote. Next, verify that the power cord is securely connected. Finally, check the electrical outlet by trying a different one.
What to do if my Ozoneair PURIFY GO Air Cleaner has low air flow?
If you're experiencing low airflow with your Ozoneair Air Cleaner, consider these possibilities: * Check the fan: Ensure that nothing is blocking the fan input or output. * Inspect the HEPA filter: If the HEPA filter is full, it will need to be replaced.
Why is there no UV light visible on my Ozoneair PURIFY GO?
If your Ozoneair Air Cleaner starts but the UV light isn't visible, it could be due to the delay function being active. Wait for the delay function to disable, or remove it by pushing and holding the Timer button until the delay symbol disappears. Alternatively, the UV lamps may be consumed and need replacement. When the treatment is running, the menu button is encircled by a blue light.
What to do if the display on my Ozoneair Air Cleaner does not work?
If the display on your Ozoneair Air Cleaner isn't working, it's possible that the product hasn't been activated. Try pushing the menu button to start the product.
Explains symbols used throughout the manual indicating precautions and special instructions.
Highlights user's obligation to follow recommendations and safety guidelines for product use.
Explains the role of ions in air purification and particle clustering.
Details how UV light disinfects by disrupting microorganism DNA.
Describes the chemical reaction activated by UV light to eliminate pollutants.
Explains how a HEPA filter traps harmful particles like pollen and dust.
Lists compliance with CE, RED, EMC, Low Voltage, and RoHS directives.
Specifies operating temperature, storage, and altitude limits.
Provides model, voltage, power, size, sound level, weight, and fan speed details.
Identifies key components of the Ozoneair Purify unit: display, outlets, stands, mounts, lamps, etc.
Explains indicators for Auto, Daily, Effect, Timer, and other display functions.
Details on placing the unit on surfaces or walls, with a warning about blocking air intake/outlet.
Steps to activate the purifier, adjust effect, and understand auto mode treatment start.
Instructions for activating the timer, selecting treatment hours, and understanding treatment start.
Steps to activate, select hours, start, and deactivate the delay function.
Guide to activating, selecting, and adjusting Daily mode, including timer settings and treatment start.
Information on when and how to replace UV lamps, including indicator lights and safety precautions.
Essential safety measures when handling, installing, or cleaning UV lamps.
Step-by-step instructions for removing and installing UV lamps.
Information on HEPA filter replacement intervals and optimal machine performance.
Step-by-step instructions for removing and installing the HEPA filter.
Addresses issues with the product not turning on, power connection, or electrical outlet.
Troubleshooting steps for when the product display does not function correctly.
Solutions for reduced air flow, including blocked fans or a full HEPA filter.
Diagnoses why the product might start without visible UV light, pointing to delay function or UV lamps.
Explains reasons why the treatment may not initiate immediately, such as auto-start delay.
General| Brand | Ozoneair |
|---|---|
| Model | PURIFY GO |
| Category | Air Cleaner |
| Language | English |
To Next Page
